Windows 7 Ultimate

ppteam · 发表于 2009-10-19 10:51 AM

I installed Windows 7 Ultimate build 7600.16385. It's supposed to be the official version which will be released on 10/22.

Testing all applications.....

金牛银熊 · 发表于 2009-10-19 10:54 AM

要想死机快，‘刎都’更新快！

ppteam · 发表于 2009-10-19 10:55 AM

hahaha...

hotday · 发表于 2009-10-19 11:10 AM

已经开机一个月，没当机过！装在raid 0上，飞快

金牛银熊 · 发表于 2009-10-19 11:21 AM

任何新‘刎都’都是先快一阵子，然后慢慢的补丁越来越多，速度越来越慢，最后逼你再买新的。。。。。。

ppteam · 发表于 2009-10-19 11:50 AM

4# hotday

good! 你的BUILD number是多少？

ppteam · 发表于 2009-10-19 11:50 AM

Metatrader works fine, no problem.

hotday · 发表于 2009-10-19 11:57 AM

RTM 7600，后面的数字可能和你的一样。我把更新关掉啦！

ppteam · 发表于 2009-10-19 12:31 PM

Ninjatrader 6.5, IB, Zenfire all work.

ppteam · 发表于 2009-10-19 12:32 PM

4# hotday

Do you configure RAID 0 on the motherboard, or on a RAID card?
Which kind of hard disk do you use for RAID 0?

I also use RAID 0, I don't feel it's that fast.... thnx.

hotday · 发表于 2009-10-19 01:22 PM

本帖最后由 hotday 于 2009-10-19 14:24 编辑

10# ppteam

I have a pci-e sata card (sil3132) installed. I guess raid controller from motherboard works too.
You have to do like this: configure raid (either 0 or 1, with 2 identical HDs connected to raid, I recommend seagate HDs, western digital won't work according to the manufacture) during boot up, then boot into windows 7 installation DVD; if raid adpator is not recognized by windows, windows won't find hard disk; it will ask for the raid adpatordriver, pop the driver cd or use a usb stick, browse for the right raid driver (64 bit e.g.). When raid adptor is recognized, the raid HD will be pop up, format new drive using windows set up utilities and install windows 7.

Always make backup of important files because raid 0 has double chance to screw up.
It'll be fast when you copy lots of files.

金牛银熊 · 发表于 2009-10-19 02:07 PM

靠，‘妓功’ 水平的活干的不错，‘奸一’ H T 弄个‘学秃斑’发扬光大！

CoolMax · 发表于 2009-10-19 03:16 PM

RAID 5 is much better choice.

ppteam · 发表于 2009-10-19 03:28 PM

Thanks a lot!
Windows 7 works like a CHAMP!

盗版就是好！:lol

dfw · 发表于 2009-10-19 10:18 PM

I haven't tried it after downloading it from Microsoft MSDN as not sure if the Cisco VPN works or not running on it.

ppteam · 发表于 2009-10-19 10:21 PM

15# dfw

It works, use VPN for Vista version.

ppteam · 发表于 2009-10-19 10:22 PM

16# ppteam

speaking of VPN software, I even use pirated VPN because I don't wanna wait forever for the tech guys.

:(13):

dfw · 发表于 2009-10-19 10:30 PM

本帖最后由 dfw 于 2009-10-19 23:34 编辑

16# ppteam

Where to get VPN for Vista? My company only provides me VPN for XP.

I never installed Vista even though I have two copies of the Vista Ultimate versions.

ppteam · 发表于 2009-10-19 11:03 PM

http://thepiratebay.org/

dfw · 发表于 2009-10-19 11:29 PM

19# ppteam

Thanks.

		自动登录	找回密码
密码			注册